BLOCK HEAT EXCHANGER RECTANGULAR
Series with rectangular blocks
Block heat exchanger in rectangular design are often used as condensers, since the condensate can be drained particularly well. The blocks are connected by PTFE gaskets between the blocks and by tie rods. Thus the blocks can be cleaned easily, which is important particularly with dirty or crystal forming media.
Special equipments
• Horizontal installation
• Both sides anti corrosive
• Optimized condensate removal
Advantages
• Easy cleaning
• Safe operation
Technical data
Operating temperature
-20°C to 150 °C with phenolic resin impregnation
-20°C to 240°C with PFA (teflon)
Operating pressure
6 bar (higher pressures on request)
Heat transfer surface:
Up to 500 m² / unit
Dimensions
380 x 380 x 380 mm
380 x 380 x 660 mm
380 x 760 x 660 mm
380 x 1140 x 660 mm
Block Height
290, 360 or 490 mm
Diameter of the drillings
Product side 10, 12, 14, 18, 20 mm
Service side 10, 12, 14 mm
Shell
C-steel or on customer’s request
Construction
Following to PED, ASME, China Code